上海寄亞機電模具科技有限公司
ShangHai Jiya Machine & Mold Technology Co. Ltd
地址:上海市閔行區莘莊鎮碧秀路98弄15號1802室(201100)
Address: Rm1802, ****5, Lane 98, BiXiu Road XinZhuang Town Shanghai
電話/Tel: 傳真/Fax:
郵箱： jiya21@sina.com 網址： www.jiya-mt.com
通用網址：中國熱流道網 網絡實名： 冷**
上海寄亞模具科技是*早將熱流道技術引進中國并率先實現在國內加工組裝熱流道系統的企業之一。經過多年對熱流道技術的研發,寄亞熱流道不僅在國內得到廣泛應用,而且替代國外熱流道,大量配套在國內生產的模具上出口到歐美,臺灣等地區。
A.提供整套熱流道系統，包括售前指導，熱流道模流分析、設計、制造、安裝試模、售后跟蹤維護等全方位服務;
B.提供熱流道系統配件，如熱噴嘴、分流板、加熱圈、加熱棒、加熱軟管、熱電偶、溫度控制器、重載插座等;
C.**熱流道技術支持: 從事熱流道近十年,經驗豐富的模具工程師為你提供CAE熱流道模擬分析, 確定*優化的模具熱流道設計方案; 曾經成功的為長安汽車CM8整套門板內飾件提供CAE模擬分析,并為其設計和制造全套門板模具熱流道系統; 在雙色模,二次注塑模,大型汽車制品(內飾件,儀表臺,保險杠)模,精密制品模,多型腔模熱流道上我們都有大量的成功經驗.
在為客戶提供上等熱流道的同時, 寄亞科技還從事相關模塑工藝的研發，以**的產品和上等的服務滿足客戶的需求. a. 氣輔成型設備,配件及氣針各種規格配置齊全,適合于客戶不同需求。b. 真空輔助注射成型是在注射制品前將模具型腔抽成真空狀態,從根本消除注射時型腔氣體對成型制品的影響。c. 射流冷**------僅使用壓縮空氣,射流冷**即可產生低于室溫-40℃的冷空氣！**是刀具無液冷卻及局部冷卻的*好選擇。
Shanghai Jiya Machine & Mold Technology Co. Ltd is a professional enterprise of hot runner system. The company has much experience in developing mold hot runner, gas assisted injecting, and vacuum assisted injecting.
There are our main products and service as follows:
● Hot runner system, concluding training, mold flow analysis, design, manufacture, installation, trial-mold assistance, and after services.
● Hot runner fittings, concluding all kinds of hot tips, manifolds, heaters, thermocouple, temperature controllers, connecters and so on.
● Other services such as CAE analysis, gas assisted injecting machine, gas assisted fittings, gas nozzles of gas assisted mold, vacuum assisted injecting machine, cool gas gun.
Shanghai Jiya shall provide high-level products and satisfactory services with key customers.